Capabilities and products
- digital flex torque wrenches
- digital torque wrenches
- MEMS digital hand tools
- PC-connected torque data upload
- online-calibrated digital torque tools
- clockwise and anticlockwise digital torquing
- multi-unit LCD torque display
Exhibits
The digital-tool range explicitly includes a Digital Flex Torque Wrench and a Digital Torque Wrench. The site organizes its torque-tool range into DT Series, WE Series, WS Series, DE Series, DK Series, WK Series, WP Series, WEP Series, IE Series and IP Series. The DT Series Digital Torque Wrench can connect to a PC and upload saved torque values for record keeping, statistical analysis and related data work. DT Series functions include torque setting, unit setting, mode setting, data storage, data clear, data output and online calibration. The wrench provides 9 pre-settable target torque values and operates in both clockwise and anticlockwise directions. Its LCD can display N-m, ft-lb, in-lb and kg-cm, while audible and visible torque confirmation is provided by a buzzer and 2 LED display. Data memory is offered in 50 or 250 point options, and the 250-point version supports PC connectivity for data download with software included. For the DT2-030 configuration, the listed square drive is 0.25 inches and length is 390 mm; AN accuracy is CW: +/-1% and CCW:+/-2%, the maximum is 30 N-m, and the measured range is 1.5~30 N-m with 0.01 N-m resolution. The same DT2-030 data also lists 22.12 ft-lb, 265.5 in-lb and 306.1 kg-cm maximum values, with measured ranges of 1.11~22.12 ft-lb, 13.3~265.5 in-lb and 15.3~306.1 kg-cm. DT3-135 uses a 0.375-inch square drive and a 415 mm length, with a maximum of 135 N-m and a measured range of 6.8~135 N-m. DT4-135 uses a 0.5-inch square drive and a 415 mm length, while DT4-200 also uses a 0.5-inch drive but has a 530 mm length and a maximum of 200 N-m. DT4-340 uses a 0.5-inch drive, is 650 mm long, reaches 340 N-m maximum and covers a measured range of 17~340 N-m. DT6-500 uses a 0.75-inch drive and 950 mm length, with a 500 N-m maximum and a 25~500 N-m measured range; DT6-850 also uses a 0.75-inch drive, extends to 1200 mm, and reaches 850 N-m with a 42.5~850 N-m measured range. The DT Series is presented for quick and accurate torquing of nuts, bolts and fasteners, with data recording for quality control and assurance and online calibration intended to reduce downtime and maintenance.
Company profile
ECLATORQ TECHNOLOGY CO., LTD. describes Eclatorq as Taiwan’s first professional digital hand tool and says it integrates hand-tool companies and IT resources in the production of digital hand tools under “The Smart Tool Standard”. The company’s stated direction is to combine existing tools with future technologies to create a new generation of high-tech tools. Its organizational values emphasize individual responsibility, mutual respect, teamwork, integrity and continuous learning. Eclatorq links those values to long-term relationships between the company, its distributors and customers and to providing solutions that move customers’ business forward. Its digital-tool development is described as a continuing effort to create more advanced and smarter tools and to change how users work with and define tools. A key technology, “The Smart Tool Standard™”, uses a micro electromechanical system (MEMS) with signal sensing, data processing and LCD data display capabilities. The system allows users to set torque in different modes, store previous torque data and convert measurement units. The DT Series description also connects the company’s digital tools with almost a decade of high-tech R&D and innovation focused on control, accuracy and convenience.