Capabilities and products
- international tool brand representation
- tool and equipment import wholesaling
- tool product consultation and after-sales support
- tool product education and training
- sales materials and technical document support
- supply of imported rebar tying machines (MAX)
- rebar tying wire supply (MAX TWINTIER)
- representation of 12V electric-fan cooling garments (COOLING WEAR)
- representation of Peltier + fan dual-system cooling garments (EXFROZEN)
- 12V flat high-output fan set supply
- 12V lithium battery set supply
- Peltier cooling device supply (EXFROZEN)
- 20,000mAh power bank supply (EXFROZEN)
- rebar cutter representation (DIAMOND)
- rebar cold cutter representation (DIAMOND)
- rebar bender representation (DIAMOND)
- rebar straightener supply (DIAMOND)
- cordless punching machine supply (DIAMOND)
Exhibits
MAX TWINTIER dedicated tie wire is supplied in four material specifications for different jobsite environments, uses a twin-reel two-strand winding design, and is compatible with RB-440T, RB-442T, RB-610T, and RB-822T. The standard TW1060T uses annealed iron wire with a 1.0 mm diameter and 60 m per roll, formed as 30 m times two strands, and is intended as a general-purpose option for daily rebar tying on ordinary construction sites. TW1060T-EG uses 1.0 mm galvanized wire with a 60 m twin-strand roll and is positioned for humid environments and jobsites that require greater rust resistance. TW1060T-PC uses annealed iron wire with a polyester-resin coating, has a 1.1 mm coated diameter and 60 m per twin-strand roll, and is intended for special environments or precision work requiring corrosion resistance, insulation, or controlled wire appearance. TW1060T-S uses 1.0 mm stainless-steel wire and is made to order; when it is used with RB-440T, the machine must first be switched to stainless-steel mode. RB-442T is a 14.4V cordless TWINTIER rebar tying machine weighing 2.5 kg and measuring 295 by 120 by 330 mm, with tying speed under 0.7 seconds and a stated 5,000 ties per full charge. The RB-442T range uses a twin-wire feed mechanism for faster tying, a wire pressing mechanism that reduces tie height, and a pull-back mechanism that strengthens ties while reducing wire consumption and the frequency of reel replacement. RB-610T is the larger-diameter 14.4V TWINTIER model, tying in under 0.7 seconds with 5,000 ties per full charge and supporting two-bar combinations from D16×D16 through D32×D29, plus specified three-bar and four-bar combinations. For RB-610T, the twin-wire system is described as twice the efficiency of a traditional model, the bent-wire mechanism lowers tie height to about 12 mm without a lower protruding tail, and the pull-back mechanism raises tying force to 1.5 times while approximately doubling ties per reel. RB-822T extends the TWINTIER range to extra-large rebar, supporting same-diameter pairs from D22×D22 through D41×D41 and mixed-diameter pairs up to D51×D32 (83 mm), with under 0.7-second tying and about 5,000 ties per full charge. RB-822T adds a roller-type wire-feed support device to smooth wire delivery and optimize feeding, pull-back, and twisting, while its tip-bending mechanism keeps tie height around 14 mm and its wire-loading assist allows reel loading without pressing the release button. The extra-large RB-822T is positioned for bridge piers, large rebar cages, precast work, tunnels, pressure-resistant slabs, and other civil-engineering applications where large bar combinations or strict concrete-cover requirements are involved. COOLING WEAR is designed for hot outdoor work and is divided into a 12V electric-fan line and a dual-system cooling-garment line. The SUN-S air-conditioned garment system uses the 12V Japanese-made RD9291J lithium battery and flat high-output fans delivering up to 68.3 L/sec; the battery provides about 4.5 hours in 12V high mode and more than 8 hours in 9V mode, with simple water resistance, flame resistance, Bluetooth connectivity, and a USB charging port. RD9120H is a 12V flat high-output fan set using a brushless motor, with maximum airflow of 4.1 m³/min (68.3 L/sec), a removable cover for cleaning, and an indicated service life of about 5,000 hours. The garment range includes KF92150, a polyester 100% hooded short-sleeve garment with 95% UV cut, deodorizing function, quick-dry lightweight construction, airflow mesh, and a cooling-pack pocket, as well as KF96990 and KU92142 vest styles with their listed fabric and pocket features. EXFROZEN combines Peltier cooling and fans in a dual cooling system, with neck Peltier elements reaching a stated surface cooling temperature of -20°C and side fans delivering up to 62 L/sec without interfering with a seat back. EXFROZEN short-sleeve model EF92690S and vest model EF92692S use Despo titanium-back processing on polyester 100% fabric, side fans, EasySet quick removal, independent Peltier and fan control, and a swing mode, with about 3.5 hours of operation in strong mode and about 7 hours in weak mode. The EXFROZEN set uses a 20,000mAh MCK-NP1Q power bank made in Taiwan, specified with PD+QC 20W fast charging, Type-C and USB-A outputs, BSMI certification R23156, dimensions of 68×138×27 mm, weight of about 411 g, and nine intelligent protection functions. DIAMOND is a Japanese brand supplying corded and cordless rebar-processing equipment, including rebar cutters, cold cutters, straighteners, benders, and punching machines for construction jobsites. Its corded rebar-cutter lineup includes HCD-16W for up to 16 mm SD420 with an approximately 2-second cut, DC-16LZ for up to 16 mm with a slim head, HCD-20W for up to 20 mm, HCD-22W for up to 22 mm with an approximately 4-second cut, HCD-25W for up to 25 mm, and heavy-duty DC-32H for up to 32 mm. The cordless cutter lineup includes DCC-1636HR for 16 mm SD420 with an approximately 2-second cut, 36V brushless motor, and 360-degree rotating head; DCC-2036BLH for 20 mm SD420 in about 4 seconds at 9.3 kg; and DCC-2036HR for 20 mm SD420 in about 3.5 seconds with a 36V 4.0Ah battery. Cold-cutting models include DFC-2536BLH for SD490 in the 10 to 25 mm range with a 3WAY handle, low-spark flush cutting, and 3.9 kg weight; DFC-3836BLH for 22 to 38 mm and D39 threaded bar at 5.5 kg; and DRC-5136BLH for SD490 D51 and threaded bar, with about 50 cuts per charge. DBR-32HD is a corded rebar straightener for SD490 D32 with push-pull operation, a 360-degree rotating head, and 110V/1330W power. The bender range includes DBD-16L for SD420 D10 to D16 with 0 to 180-degree bending, a stated 180-degree cycle of 1.5 seconds, 11 to 31R, 20 kg weight, and 110V power, while DBD-16H is the heavy-duty version for high-frequency continuous bending. Cordless punching machines include EPC-1525W for Φ15 mm holes in 6 mm plate with 350 operations per charge at 36V 4.0Ah and 7.5 kg, EPC-1525BLH with a 36V brushless motor and double-acting mechanism, and EPC-1538BLH with Φ15 mm maximum round holes, 500 operations per charge, 6.8 kg weight, a 360-degree rotating head, and hydraulic release mechanism. Across MAX, COOLING WEAR, EXFROZEN, and DIAMOND products, H-XIN combines imported professional tools and jobsite equipment with wholesale supply, product consultation, after-sales support, education and training, sales materials, and technical documents for channel and engineering customers.
Company profile
H-XIN INDUSTRIAL CO., LTD. traces its origins to blacksmithing agricultural tools and kitchen knives and was formally established in 2016, after which it developed from hardware tools and built its business in Taiwan's tool-and-equipment agency market. Its core business covers representation of international tool brands, import wholesaling, and professional consulting, with a procurement network extending to Japan. The company states that products are imported directly from brand manufacturers or authorized distributors and combines this supply model with wholesale quotations, product consulting, and after-sales support. H-XIN serves wholesalers, engineering companies, and retail channels across Taiwan and describes long-term cooperation with international brands as part of its tool-and-equipment supply network. For business partners, it also provides product education and training, sales materials, and technical documents to support sales teams. The represented product groups named by the company include MAX rebar tying systems, COOLING WEAR cooling garments, and DIAMOND rebar-processing power tools.