Capabilities and products
- integrated scaffolding and formwork engineering services
- scaffolding and formwork construction design drawings
- scaffolding and formwork structural calculations
- 3D drawings for scaffolding and formwork
- on-site engineering guidance for scaffolding and formwork
- scaffolding safety training
- scaffolding assembly and disassembly instruction
- scaffolding user training
- Ring Lock scaffolding system manufacturing
- Modular System Formwork manufacturing
- formwork tie rods
- formwork wing nuts
- Ring Lock scaffolding with less than 0.3% vertical deviation
- facade scaffolding for exterior access and building work
- stage scaffolding for concerts, live events, and grandstands
- heavy-duty shoring scaffolding for slabs, bridges, and elevated structures
- scaffolding solutions for cantilevers and suspended platforms
- four-leg shoring towers with up to 72-ton load capacity
- preassembled shoring towers relocatable by crane or forklift
- stage scaffolding support integrated with audiovisual equipment
- height-adjusting scaffolding jack bases
- custom-size scaffolding jack bases
- tie-rod water stops for wall formwork
- Base Beam structural component for modular formwork
- mobile working platforms
Exhibits
The core product families include Ring Lock Scaffolding, Formwork, and Components, with SUCOOT CO., LTD. specifically identifying Ring Lock Scaffolding Systems, Modular System Formwork, and Scaffolding & Formwork Accessories as its main development and manufacturing fields. Its Ring Lock Scaffolding System uses a modular design for fast assembly and is stated to maintain less than 0.3% vertical deviation for stability and load performance. The Modular System Formwork integrates Base Beam, Top Beam, and Triangle Strut Frame components for casting walls, columns, slabs, and bridge superstructures. Formwork Accessories include high-strength, precisely manufactured items such as tie rods, wing nuts, and water stoppers for construction-site use. These scaffolding and formwork systems are used across bridges, power plants, high-tech factories, commercial buildings, and MRT projects for elevated work, temporary support, and concrete forming. SUCOOT CO., LTD. independently developed its modular Ring Lock Scaffolding Systems under the Ring System brand and offers three fully compatible Ring System configurations made with high-tensile STK500 steel and hot-dip galvanized for durability. Facade Scaffolding is intended for exterior access, facade work, and general building projects, and is described as lightweight, flexible, and easy to handle on site. Stage Scaffolding is engineered for concerts, live events, and grandstands, with a modular configuration, EN and ANSI certification, and fast assembly for varied stage layouts. Shoring Scaffolding provides heavy-duty support for concrete slabs, bridges, and elevated structures and is designed for extreme loads, uneven terrain, and repeated relocation. For complex Ring System layouts, the in-house engineering team supports projects with professional drawings, structural load analysis, and solutions for difficult terrain, cantilevers, suspended platforms, and multi-level configurations. The Ø60.2 T:3.2mm Shoring Heavy Duty Scaffolding is built for civil works and infrastructure projects and can be used with traditional timber formwork, modular formwork systems, and steel panel formwork. Its four-leg shoring towers are stated to support loads of up to 72 tons, enabling fewer towers to be used while leaving more open space for workers and equipment. The heavy-duty shoring system uses wedge-lock assembly without special tools, can be assembled at ground level, and can be relocated as a preassembled tower by crane or forklift without dismantling. Adjustable jack bases and precise vertical alignment allow the shoring system to work on variable or sloped terrain, including complex civil works described with 37-meter elevation drops. The heavy-duty system lists STK500 hot-dip-galvanized vertical, horizontal, and diagonal members, with vertical pipe Ø60.2mm × t:3.2mm, ring spacing of 500mm, horizontal pipe Φ48.6mm × 2.3mm, and multiple standard member lengths. Certification and testing information for the shoring system lists ISO-9001, EN 12810-1, ANSI/ASSE A10.8, material certification, magnetic particle testing, loading and tension testing, and third-party professional laboratory work. The Ø48.6 T:3.2mm Stage Scaffolding is designed for music festivals, sports events, and large-scale live productions, using modular construction and ground-level preassembly that can be lifted into position. Stage Scaffolding integrates with trusses, PA towers, roof systems, LED walls, and lighting rigs to provide structural support for multimedia-heavy stage environments. The Stage Scaffolding is certified to EN 12810-1 and ANSI/ASSE A10.8 and uses wedge-head connections intended for quick assembly with minimal tooling. Its vertical, horizontal, and diagonal members use STK500 steel with hot-dip galvanization, and the listed vertical and horizontal pipes use Ø48.6 T:3.2mm dimensions with 500mm ring spacing on the verticals. When used properly, the stage structure is stated to maintain stable load-bearing performance for over 20 years, and the company’s design team can provide custom structural drawings for flat stages, tiered seating, vertical LED walls, and suspended lighting or sound systems. The Scaffolding Jack Base serves as the ground-bearing and height-adjusting base for vertical members in a Ring Lock Scaffolding System and is used for scaffolding towers, stage towers, and shoring scaffolding. Suitable jack-base surfaces include concrete, asphalt, steel plate or deck, and precast panels, while compacted soil is used with timber or steel sole plates to spread the load. Jack-base options include Solid JB-03 in Ø1-1/4" × 24" and Ø1-3/8" × 24", and Tube TJB-03 in Ø38.5 × 600 mm T: 4.0 mm and Ø1.9" × 36" T: 5.0 mm, with custom sizes also available. The Formwork Water Stop is installed in the middle of a tie rod to block water penetration through concrete walls, providing a dedicated water-stopping component for wall-formwork assemblies. Listed water-stop models include WS-68 Ø17mm D Thread P:10mm with a maximum load of 20,090 Kgf and safety load of 10,000 Kgf, and WS-68B Ø23mm D Thread P:10mm with a maximum load of 32,000 Kgf and safety load of 16,000 Kgf. Additional water-stop configurations include WS-68 Ø17mm Ball Screw 4 TPI, WS-68H Ø17mm and Ø23mm D Thread P:10mm, WS-68R Φ17mm D Thread P:10mm, and WS-68S Φ10mm Ball Screw 6 TPI with their corresponding listed load values. The same formwork material information gives engineering properties including E = 200 GPa, Fy = 365 MPa, Ixx = 175.4 cm4, Ma = 5.5 kNm, and Va = 17 kN for the referenced beam data. Base Beam or Soldier Beam applications are stated for bridge viaduct formwork, slab, beam, and wall formwork, large-span structures, lateral support, infrastructure projects, high-tech factories, steel mills, power plants, and commercial or residential construction. SUCOOT Base Beam is a structural component in the modular formwork system, manufactured from SM490A high-tensile steel with hot-dip galvanization for heavy concrete loads and long-span civil-engineering applications. The Base Beam can be integrated across slab, wall, column, and bridge formwork and can function as a structural base, wall brace, bridge pier-cap diagonal support, main bearer, or secondary bearer depending on the formwork configuration. Standard Base Beam lengths are primarily provided in 300mm increments from 600mm to 3000mm, while lengths below 600mm are available in 150mm intervals down to a minimum of 150mm, and custom lengths can also be manufactured. Each Base Beam is stated to use SM490A structural steel with mill certificates verifying chemical composition and tensile strength, and pressure testing is used under simulated load conditions to check resistance to deformation and failure. Technical data for the Base Beam lists properties including maximum section area 2300 mm², minimum section area 1655 mm², E = 200 GPa, Fy = 355 Mpa, allowable bending moment Max = 26.8 kNm, allowable bending moment May = 11.6 kNm, and allowable shear force Vax = 90.9 kN. The Base Beam is used in applications including bridges, viaducts, culverts, tunnels, high-tech factories, steel mills, power plants, and the forming of columns, walls, and slabs, while the company notes that Base Beam and Soldier Beam are not interchangeable because their installation methods, connection details, and material properties differ. A Mobile Working Platform is part of the company’s named product range, and SUCOOT CO., LTD. has also demonstrated a mobile working platform built with its Ring Lock Scaffolding Light Duty Series as a practical elevated-work application. Other demonstrated structures include a 5.4 m clear-span scaffolding structure and the Super Modular Shore with a failure load exceeding 300 tons, showing additional configurations within the company’s scaffolding and shoring capability.
Company profile
SUCOOT CO., LTD. was founded in 1984 and specializes in scaffolding accessories and formwork parts, while its broader business covers the research, development, and production of Ring System Scaffolding, formwork and scaffolding components, and Formwork System products. The company serves customers in more than 65 countries worldwide, giving its scaffolding and formwork business an established international supply and service reach. Its all-in-one scaffolding and formwork service combines project solutions with design, structural calculation, material supplementation, and on-site engineering instruction so customers can coordinate these functions through one provider. Technical services listed by SUCOOT CO., LTD. include construction design drawings, structural calculation, analysis, 3D drawings, and on-site guidance. Its on-site engineer assistance further includes safety training, assembly and disassembly instruction, and user training, while its global-service activities include on-site instructors, educational training, and hands-on drills. The company describes more than 40 years of expertise in infrastructure and civil-engineering projects, with experience spanning high-speed rail and power plants and with Ring System Scaffolding and System Formwork presented as meeting international safety standards. Named project references include the Central Taiwan Science Park Southbound Access Road in the highway-bridge category, Thai Airline A380 aircraft maintenance, and the Haikou City Jiangdong Ave. underground box culvert. SUCOOT CO., LTD. identifies owners, supervisory units, construction plants, formworkers, contractors, supervisors, and formwork specialists among the customer and professional groups addressed by its products and solutions. The company states that it was the first and only company in Taiwan to obtain EN-12810-1 and that it provides customers with operating manuals and warranty support. Its approach combines material supply with engineering calculation, project design, field instruction, training, and after-supply documentation, creating a service system around scaffolding and formwork rather than limiting the business to component sales.