Capabilities and products
- Manufacturing of aluminum-alloy-handle cable cutters for copper and aluminum cables
- Manufacturing of ratcheting cable cutters
- Manufacturing of wire rope cutters
- Manufacturing of non-insulated terminal crimping pliers
- Manufacturing of dieless non-insulated terminal crimping pliers
- Manufacturing of reduced-effort ratcheting crimping pliers
- Manufacturing of hexagonal crimping pliers
- Manufacturing of closed-end connector crimping pliers
- Manufacturing of ratcheting insulated-terminal crimping pliers
- Manufacturing of European-style cord-end ferrule crimping pliers
- Supply of hand sealing pliers
- Supply of bending tools for copper and aluminum cables
- Supply of manual copper plate bending tools
- Supply of 8-piece crimping tool sets
- ODM/OEM services
Exhibits
Teleantool Co., Ltd. offers cable cutters, wire-rope cutters and crimping tools for non-insulated terminals, high-leverage crimping, hexagonal crimps, insulated terminals and European-style cord ends, plus ratcheting cable cutters. The company also provides ODM and OEM services according to customer requirements. The TLA TRB-325 cable bender is designed for Taiwanese cable systems and heavy-cable installation, handling copper and aluminum cable up to 325 mm², approximately 600 MCM. The TRB-325 handles single-core and multicore IV, CV and XLPE cables and is suited to bending operations in confined spaces such as conduit boxes and distribution panels. The TRB-325 has an enhanced leverage mechanism that reduces the required effort by 25%, a 90° offset dowel arrangement and a high-strength steel body. Its special anti-slip powder coating is designed for wear and rust resistance and secure handling, while smooth dowels and three anti-slip etched lines limit cable abrasion and improve control. The TRB-325 is made in Taiwan and is protected by utility model patent M673496. The TLA THC-150 lightweight aluminum-handle cable cutter is intended for copper and aluminum wires and has a copper-cable cutting capacity of 150 mm² (300 MCM). The TLA THC-125 copper-and-aluminum cable cutter cuts copper cables up to 120 mm² (250 MCM) and uses a lightweight aluminum-alloy handle. The TLA THC-250 cutter for copper and aluminum cables has a copper-cable cutting capacity of 325 mm² (600 MCM) and a lightweight aluminum-alloy handle. The TLA THC-500 cable cutter handles copper and aluminum cable and can cut 500 mm² (1000 MCM) copper cable and 25KV 500 MCM copper cable. The THC-125, THC-150, THC-250 and THC-500 use forged chrome-vanadium steel blades, special edge grinding and heat-treated cutting components to reduce chipping, extend tool life and lower cutting effort. The TLA THC-80 uses specially ground blades for 4/0 aluminum and 3/0 stranded copper wire, with through-hardened rather than case-hardened cutting surfaces. The THC-80's riveted joint allows smooth cutting action while preventing handle wobble. The TLA TSC-100W wire-rope cutter has a cutting capacity of Ф10 mm steel wire rope and 100 mm² copper cable. The TLA TSC-60W wire-rope cutter cuts Ф9 mm steel wire rope and 80 mm² copper cable. The TLA TSC-200W wire-rope cutter cuts steel wire rope of Ф14 mm diameter and 150 mm² copper cable. The TSC-60W, TSC-100W and TSC-200W feature forged chrome-vanadium blades and light aluminum-alloy handles; their blades are heat treated above HRC60 and specially ground to reduce chipping, increase blade life and make cutting easier. The TLA TRC-325 ratcheting cable cutter cuts copper and aluminum cables up to 600 MCM and is designed for higher cutting capacity with reduced hand force on large-diameter cables. The TRC-325 has hardened-steel cutting blades and anti-slip rubber hand guards; its compact, lightweight body can be locked closed for carrying or storage. The TRC-520 ratcheting cable cutter handles 1000 MCM (500 mm²) copper and aluminum cables, as well as 25KV 500 MCM copper cable. The TLA TH-120B is a manual copper-plate or busbar bending tool with a body cast from ductile iron. An eight-piece crimping-tool set is also listed, comprising two main bodies, one crimping die set and five quick-change die sets in a storage case. The TLA THX-10N hexagonal crimper handles non-insulated terminals in DIN 1.5, 2.5, 4, 6 and 10 mm² sizes, with an effort-saving lever and ratchet mechanism for complete crimping. The THX-10N and THX-10 use heat-treated medium-carbon-steel handles and heat-treated jaw rivets, with durability guaranteed for up to 30,000 operating cycles. The TLA THX-10 is another hexagonal crimper for DIN 1.5, 2.5, 4, 6 and 10 mm² non-insulated terminals, using an effort-saving lever, ratchet and heat-treated medium-carbon-steel handle. The THX-50 hexagonal crimper is for DIN 16, 25, 35 and 50 mm² non-insulated terminals; it is designed for easy carrying and measures 370 mm long and 800 g in weight. The THX-50 features a heat-treated medium-carbon-steel handle, heat-treated riveted jaws and a ratchet mechanism, with up to 30,000 cycles guaranteed. The TLA TH-38 non-insulated terminal crimper covers JIS 5.5/8/14/22/38, DIN 6/10/16/25/35 mm² and AWG 10/8/6/4/2, with a length of 370 mm and weight of 800 g. The TH-38 uses a heat-treated medium-carbon-steel handle, heat-treated riveted jaws and a ratchet mechanism, with up to 30,000 crimping cycles guaranteed for the jaw assembly. The TLA TH-25 crimper for non-insulated terminals covers JIS 5.5/8/14/22 mm², DIN 6/10/16/25 mm² and AWG 10/8/6/4, with a compact, portable design. The TH-25 has a heat-treated medium-carbon-steel handle, hydraulically riveted jaws and a ratchet, with up to 30,000 cycles guaranteed for the riveted assembly. The TLA TH-2 non-insulated terminal crimper is sized for JIS 1.25/2 mm², DIN 1.5/2.5 mm² and AWG 16/14, in a compact, lightweight format. The TH-2 combines a heat-treated medium-carbon-steel handle, hydraulically riveted jaws and a ratchet for accurate, complete crimping, with a guarantee of up to 30,000 cycles. The TLA TH-6 non-insulated crimper covers JIS 1.25/2/3.5/5.5, DIN 1.5/2.5/4/6 mm² and AWG 16/14/12/10. The TH-6 is compact and portable, with a heat-treated medium-carbon-steel handle, hydraulically riveted jaws and a ratchet mechanism. The TLA TH-8S non-insulated terminal crimper handles JIS 1.25–8 mm² sizes and has undergone a 30,000-cycle continuous durability test. The TH-8S uses a new ratchet mechanism that reduces the required grip force by 30% compared with the company's TH-8 model. The TLA TH-28S labor-saving crimper handles CE1–CE8 closed-end connectors and uses a leverage mechanism, heat-treated medium-carbon-steel handle, heat-treated jaw rivets and a ratchet. The TH-28S measures 246 mm in length and weighs 390 g, with the jaw assembly guaranteed for up to 30,000 cycles. The TLA TH-128 closed-end connector crimper handles CE1–CE8 connectors and has a heat-treated medium-carbon-steel handle, riveted jaws and a ratchet mechanism; it measures 280 mm and weighs 450 g. The TLA TH-120 is a dieless non-insulated terminal crimper with quick adjustment over DIN 10–95 mm² sizes for battery cables, welding cables and building wiring. The TLA TH-2026W crimper for nylon-insulated European cord-end sleeves handles 0.25–6 mm² stranded copper wire and has six separate crimping positions. The TH-2026W has a built-in ratchet for complete crimping, a dial for adjusting crimp force and a comfortable, non-slip TPE handle designed to reduce hand fatigue. The TLA TH-2026D ratcheting insulated-terminal crimper handles 22–10 AWG stranded copper wire, with three crimp positions: red 22–16 AWG, blue 16–14 AWG and yellow 12–10 AWG. The TH-2026D includes a ratchet for accurate, complete crimps, a crimp-force adjustment dial and a non-slip TPE handle intended to reduce hand fatigue. The TLA LS-001 hand sealing pliers are intended for utility-service seals and can be used with taxis, electric meters, computers, luggage, gas meters, water meters and logistics applications. The LS-001 is described as durable, portable and lightweight, with a length of 195 mm and a 12 mm crimping range. For its cable and wire-rope cutters, the listed sales methods include export, manufacturing and OEM/ODM, with payment terms of T/T and L/C.
Company profile
Since 1996, Teleantool Co., Ltd. has specialized in manufacturing crimping pliers, cable cutters and wire-rope cutters for applications across the power-engineering industry. With over 25 years of production experience, the company continues to improve its products and manufacturing processes with a focus on quality and competitive pricing.