Capabilities and products
- cable tie R&D and production
- cable glands
- non-insulated ring terminals
- non-insulated spade terminals
- non-insulated butt connectors
- parallel splices
- closed-end connectors
- wire-nut connectors
- wing connectors
- ULTRA connectors
- insulated ring terminals
- insulated fork/spade terminals
- flanged fork terminals
- insulated hook terminals
- blade terminals
- hook blade terminals
- insulated pin terminals
- nylon butt splices
- PVC butt splices
- heat-shrink butt connectors
- insulated female disconnectors
- insulated male disconnectors
- nylon fully insulated female disconnectors
- nylon fully insulated male disconnectors
- piggy-back disconnectors
- twin wire end sleeves
- single wire end sleeves
- quick splice connectors
- terminal blocks
- alligator clips and tubes
- terminal block connectors
- flag terminals
- ring tubular lugs
- 3D modeling and process simulation
- automated production processes
Exhibits
YY's wiring-product scope includes cable ties and related wiring components, together with a broad range of connectors and terminals for lighting, homes, buildings, and other electrical applications. The company states that its connectors and terminals use standard material and are designed so installation does not cause short circuit. RING NON-INSULATED TERMINAL 38RNB and SPADE NON-INSULATED TERMINAL 38SNB are listed in copper, while NON-INSULATED BUTT CONNECTOR 38BS and PARALLEL SPLICE 38PS use copper tube terminal material. CLOSED-END CONNECTORS 30CE use a Nylon 6/6 housing rated flame-retardant to UL94V-2 and an aluminum or copper sleeve with tin plating; the listed rating is 300 V maximum and 105°C (221°F). WIRE-NUT CONNECTORS 30E use a flame-retardant UL94V-2 tough thermoplastic shell with an inserted steel spring, follow UL 486C and CSA 22.2 No. 188, and are rated 600V maximum for building wiring and 1000V maximum in lighting fixtures, luminaires, and signs. WING CONNECTORS 30WC use a flame-retardant UL94V-2 thermoplastic shell with a zinc-plated square-wire spring, follow UL 486C and CSA 22.2 No. 188, and carry the same 600 V building-wiring and 1000 V lighting-fixture ratings. ULTRA CONNECTORS 30UC use Polycarbonate or Nylon 6/6 housings rated UL 94V-2, with copper tin-plated sleeves and model-specific spring-steel or steel-plate structures; the Nylon 6/6 housing is listed at T110°C under IEC and 105°C/221°F under UL. UC connectors are rated 600V maximum for building wiring and 1000V maximum in lighting fixtures, luminaires, and signs, while UC-8 in PC material is listed with a working temperature of T85°C. INSULATED RING TERMINALS 37RVR, INSULATED FORK/ SPADE TERMINALS 37SVY, FLANGED FORK TERMINALS 37FFV, INSULATED HOOK TERMINALS 37HV, BLADE TERMINALS 36BV, HOOK BLADE TERMINALS 36HBV, and INSULATED PIN TERMINALS 36PIN use copper terminals with Vinyl (PVC) insulation and are listed at 105°C and 600 VOLTS MAX. NYLON BUTT SPLICE 36BCN uses a copper-tube terminal with Nylon insulation and a listed rating of 105°C and 600 Volts, while BUTT SPLICE 36BCV uses copper with Vinyl (PVC) insulation and a rating of 75°C and 600 Volts. HEAT SHRINK BUTT CONNECTORS 36BCH use heat-shrinkable tube insulation and copper-tube terminals, with a listed shrink temperature of 105°C and a 600V maximum rating. INSULATED FEMALE DISCONNECTORS 36FVD and INSULATED MALE DISCONNECTORS 36MVD use brass terminal material with Vinyl (PVC) insulation and are listed at 75°C and 300 VOLTS MAX. NYLON FULLY INSULATED FEMALE DISCONNECTORS 36FND use brass terminals and Polyamide (Nylon) insulation at 75°C and 300 VOLTS MAX, while the listed NYLON FULLY INSULATED MALE DISCONNECTORS 36MND use copper and Polyamide (Nylon) insulation at 105°C and 600 Volts. PIGGY BACK DISCONNECTORS 36PBD and INSULATED BULLET MALE/FEMALE DISCONNECTORS 36BMC and 36BFC are also listed, with brass terminal material and Vinyl (PVC) insulation in the stated configurations. TWIN WIRE END SLEEVE 35TET and SINGLE WIRE END SLEEVE 35CE use Nylon 6/6 insulation and tin-plated copper-tube terminals, operate from -40°C to +105°C, and reference DIN-46228/4. QUICK SPLICE 30QS uses PP or Nylon 6/6 with a copper chip and is described as allowing the chip to be pushed down until the wire skin is pierced without peeling the wire skin or applying tape before use. TERMINAL BLOCK 35TB uses a Nylon66 UL 94V-2 housing, nickel-plated brass-alloy terminal body, zinc-plated steel screw, and a listed working temperature of 105°C under UL. ALLIGATOR CLIPS AND TUBES 22ACT use a soft PVC sleeve with nickel-plated iron and are listed in red and black with other colors available on request. TERMINAL BLOCK CONNECTOR 35TBC uses a PC housing, brass sleeve, and zinc-plated iron screw, with a listed working temperature from -60°C to 135°C and voltage of 250 to 450V at 32Amp. FLAG TERMINALS 38FNB are listed in copper, while RING TUBULAR LUGS 39CL use copper-tube terminal material. Beyond these connector families, YY states that advanced R&D tools and manufacturing technologies such as 3D modeling, simulation analysis, and process automation are used to improve product-design efficiency and manufacturing precision. The company continues investing in digital R&D platforms and manufacturing equipment and states that product technology and quality are continuously optimized for global-market requirements. Its product and manufacturing program therefore links cable ties and wiring components with connectors, terminals, cable glands, automated production, 3D modeling, simulation analysis, process automation, and internationally certified quality-management systems.
Company profile
Y.Y. CABLE ACCESSORIES CO., LTD. is described as a leading domestic manufacturer of wiring products, specializing in the research, development, and production of cable ties and related wiring components. The company's listed international certifications include ISO-9001, ISO-14001, ISO-45001, ISO-14064-1, ISO-14067, and IATF16949. YY states that it continues to invest in technological R&D and manufacturing facilities so products can respond to market demand and international standards. Its R&D team works on both new-product development and optimization of existing products, using digital design tools and advanced process simulation and analysis to improve design accuracy and efficiency. In response to low-carbon goals and smart-manufacturing trends, the company analyzes production operating data to improve management effectiveness and reduce resource waste. YY states that its professional manufacturing covers product design and development, raw-material procurement, manufacturing production, and quality control, combining mold design with advanced equipment processes. Employee training, a centralized material-supply system, optimized workflow planning, and SOP/STD standardized procedures are used to support highly efficient automated production. The company has implemented automated production equipment and rigorous quality-control procedures and states that process optimization is used to improve efficiency and reduce delivery time. For scientific R&D, YY uses computer-aided design systems, invests resources in new-product research, improves mold and production quality, and expands product specifications and range for changing market demand. The company records the Tainan SinJi Factory beginning operation in 2021 after acquiring a site of approximately 16,530 square meters in the Tainan SinJi Industrial Zone in 2017 and beginning construction in 2018. Its milestones also list the 28th National Award of Outstanding SMEs and the 6th Dun & Bradstreet SME Elite Award in 2019, successful completion of the Green Giant guidance program, ISO/TS16949 certification in 2016, and the start of a Cable Glands production line in 2015. YY states that its products are marketed worldwide from Taiwan and that continuing internal-management optimization and technical support are part of its approach to serving global customers.